Whisky's No.9 24f Carbon Drop Bar is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Whisky's No.9 12f is their most versatile carbon drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. Full carbon construction offers a light, stable platform while reducing vibration and adding comfort. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - Carbon - 220g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
From loamy backwoods adventures to rocky desert expeditions, Giant's Connect Trail Riser Handlebar puts you in contact with it all. It's made from tough 2014 aluminum. And, it has plenty of width, which provides pinpoint steering on techy trail sections plus leverage for climbing and sprinting.
- Ultra-light high-performance full-SLR composite construction makes for maximum stiffness and lowest possible weight - 9° rearward/5° upward sweep - 19mm rise - Micro-adjust set-up markings - Not compatible with bar ends
Unparalleled comfort A carbon road handlebar with IsoCore that reduces road vibration by 20% and features a variable compact radius that offers additional ergonomic positions. Chain-rattling pavement is no longer an issue thanks to our innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibration than other carbon bars. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar. - OCLV carbon with IsoCore continuous inner-laminar technology - Replaceable IsoZone EVA pads maintain original grip diameter - Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions - IsoCore technology decreases road vibration by 20% over traditional carbon bars - Compatible with clip-on aero bars - Includes four replaceable EVA IsoZone pads for tops and drops - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
Giant's Connect XC Riser Handlebar is great for riders that like a little bit of rise, but still want to keep an aggressive, forward position. It's made from 2014 aluminum for reasonable weight and great strength. And, it has plenty of width, which provides pinpoint steering on techy trail sections plus leverage for climbing and sprinting.
- High-polished, chrome-plated CrMo construction - Purebred classic track bar in either 31.8mm or 26.0mm bar-clamp diameter - Deep drop and reach profile for true sprinting performance - 654g @ 42cm(26.0mm): drop/reach are measured center-to-center
The drag-defying profile of Bontrager's Elite Aero VR-CF Handlebar is proven to save up to 23 seconds per hour over a traditional round handlebar. Take advantage of the shaped 6066-T6 aluminum and internal routing, and bring your ride's aerodynamics to the next level. - Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - Aero drop bar profile is more aerodynamic compared to traditional round bars - Internal cable routing for Di2 and standard housing - Laser-etched brake lever position lines for spot-on control setup - UCI compliant
Lightweight aluminum construction with a versatile riser bar design.
Upgrade your handling experience with the confidence and poise of the Bontrager Elite VR-C handlebar. Constructed of 6061-T6 aluminum alloy in a proven ergonomic compact shape, The Elite Road bars help you quickly chase down surprise attacks and still find a comfortable all-day position. - Ultralight custom butted 6061-T6 alloy construction - Variable-Radius Compact (VR-C) design allows shorter reach and drop - Compatible with clip-on aero bars
Feel the difference The inForm Satellite Plus IsoZone system is the comprehensive defense against hand and wrist discomfort. By pairing integrated elastomer handlebar inserts with advanced ergonomic grips, this bar and grip combo reduces peak hand pressure by nearly 30% while reducing vibration and absorbing impact for a smoother, more enjoyable ride. Product details - Custom-butted, 6061-T6 alloy construction - IsoZone elastomer inserts offer reduced upper body fatigue - Performs best when combined with inForm IsoZone grips (included) Specifications - Backsweep: 9 deg. - Upsweep: 4 deg. - Material: Alloy - Weight: 487g
- OCLV Carbon fiber construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - KVF profile top section saves 23 seconds per hour compared to traditional bars - Internal cable routing for Di2 and standard housing - Laser-etched brake lever position lines for spot-on control setup - UCI compliant - Drop: 123mm - Reach: 93mm - Weight: 220 grams (38cm), 225 grams (40cm), 230 grams (42cm), 235 grams (44cm)
Unparalleled ride quality XXX is a testament to the power of judicious carbon composite engineering. Not only is it incredibly light and stiff, but its OCLV Carbon construction also offers an unparalleled ride quality. The Unique Variable Radius Compact bend creates the ideal hand position for quick transitions from the tops to the drops. Key features - OCLV Carbon fiber construction - Variable Radius Compact (VR-C) design allows shorter reach and drop - Laser-etched brake lever position lines for spot-on control setup
The Bontrager XXX Integrated Handlebar/Stem is a one-piece carbon bar/stem combo that brings clean looks and light weight to any road bike. Lightweight 100% OCLV Carbon construction offers a great road feel and control, while calibration marks and a flat front surface ensure easy lever installation. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Product details - Seamless accessory integration with Blendr - Flat surface front of bar for clean cable routing - Calibration marks allow precise, accurate and repeatable brake lever position - Variable radius, compact flare (VR-CF) shape offers wrist clearance in the drops - 100% OCLV Carbon construction - Internal relief channel eliminates need for additional spacer above stem - Safe for use with carbon and alloy steerer tubes - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Forged aluminum construction with a retro curved design.
The Svet V Base Bar features a low stack height and a deep drop, placing the rider in a low, aggressive steering position when out of the aerobars. - Multi-direction, multi-layer carbon fiber construction - Two-Way Fit System: Aggressive fit in standard position. Flip the base bar for a more elevated position - Straight Brake Extension: Help maintain control while remaining aerodynamic - Clean Cable Routing: Pre-slotted for internal cable routing. Di2 compatible. - 3:1 wing section with zero drop
- Top radius allows comfortable hand positions all the way across, while maintaining short reach - 6061-T6 Double butted alloy - Designed to allow a flat transition between handlebar and brake lever - Flattened indentation for cable routing - 12 degree outward bend in the drops is great for gravel riding and cross racing - 120mm wide center section for mounting accessories
- Ultra-Light High-Performance Full-SLR Composite Construction Makes For Maximum Stiffness And Lowest Possible Weight - 9° Rearward/ 5° Upward Sweep - Micro-Adjust Set-Up Markings - Not Compatible With Bar Ends
- AL6061-T6 alloy construction - 16-degree flared drops for power, stability, and control - Flattened aero top and 5-degree ergo back sweep for enhanced comfort and grip - ISO-Road safety certified - Clamp Size: 31.8mm - Rise / Reach: 70mm - Upsweep / Drop: 124mm - Back Sweep / Bend: 5-degree - Color: Black - Finish: Matte - Type: Road Drop - Material: AL6061
- Full UD carbon construction - 31.8mm clamp diameter - 9-degree back sweep - EN-Mountain safety certification - Upsweep / Drop: 4-degree - Back Sweep / Bend: 9-degree - 200g
- Versatile urban or touring bar - Flattened center section provides an additional ergonomic hand position - Bar can be installed in a rise or drop position - AL6061-T6 tubular alloy construction - Laser etched graphics - ISO-City safety certified
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Ultra-light composite bar improves aero performance and enhances aesthetics with wind tunnel inspired design. FEATURES - 2018+ Propel proprietary shaped handlebar - Requires the usage of 2018+ Propel Contact SL / SLR Aero Stem - Ultra-light carbon composite - Bar-end Di2 junction box compatible - 72mm reach - 132mm drop - Clamp: Only compatible with Giant Propel AeroSystem Stem - Weight: 225g (420mm)
Experience the road with Origin-8's Pro-Fit Compact Handlebar. It delivers a comfortable compact-drop shape that's crafted from lightweight 6061-T6 aluminum. With the tight 120mm drop and short 70mm reach, you'll have an ergonomic position that's easy on your back.
Origin-8's Pro Pulsion Bull Horn Handlebar is crafted from lightweight 6061-T6 aluminum. It features a great bullhorn shape that works great for fixed gear and city bikes. And, it comes in a bevy of colors to add some style to your ride.
- AL6066 tubular alloy construction - Traditional road bar available in a multitude of widths - EN-Road safety certification - Clamp Size: 31.8mm - Rise / Reach: 80mm - Upsweep / Drop: 128mm - Color: Black - Finish: Matte - Type: Road Drop
- AL6061-T6 alloy construction - 16-degree ergonomically flared drops provide greater power, stability, comfort, and control - ISO-Road safety certified - Clamp Size 31.8mm - Rise / Reach: 86mm - Upsweep / Drop: 130mm - Color: Black - Finish: Matte - Type: Road Drop - Material: AL6061
- Swaged 6061 aluminum with unique bend: 15 degree forwards then 30 degree back
The Mad Max handlebar has been a part of WTP's line since 2008 to cater to Max Gaertig’s powerful style with a towering (at the time) 8.7" rise. The Mad Max bars now feature a rise of 9.5", and a width of 30". Paired up with max's proven geometry, the classic just got better.
Aluminum North Road style touring handlebar.
Easton's category-leading EA30 handlebar defines on-road ergonomics and stealthy, understated style. Traditional round tops, a comfortable 130mm-deep drop, and a 75mm reach provide stellar fit and wide-ranging versatility.
- AL6061 alloy construction - Available in 26.0 and 31.8 clamp sizes - Classic pista style - Rise / Reach: 101mm - Upsweep / Drop: 169mm - Finish: Shot-peen - Type: Road Drop - Material: Aly
- Versatile urban or touring bar - Bar can be installed in a rise or drop position - AL6061-T6 tubular alloy construction - Laser etched graphics - ISO-City safety certified
FSA's Energy Road is a traditional drop bar made from high-strength 7050-aluminium tubing. The finish is shot-peened and sandblasted on the taped areas for grip. There’s even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. - Quad-butted, tapered and shot-peened AL7050/T10 - 120mm wide round center section for mounting accessories - 4-degree outward bend - Bar Drop: 150mm - Bar Reach: 80mm
For cyclocross, Thomson presents the Katie Compton Signature ‘cross bar. Katie brings her multiple championships, European racing, and Olympic experience to give you a bar built her way for ‘cross. It’s the natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. This is the carbon fiber cyclocross handlebar built to take all the season can dish out. Certified to EN, tested to DIN+.
Position versatility makes Zipp’s Service Course 80 bars an instant favorite. The drops are kept close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff for uncompromising strength, these aluminum bars are ready for anything.
Ritchey Comp EvoCurve road bar with double-radius bend, 5-degree sweep, short shallow reach and drop. - Measured center-to-center at the hood - Short shallow double-radius bend - Compatible with clip-on bars - Double-butted 6061 alloy - 31.8 mm Bar Clamp Diameter - 128 mm Bar Drop - 83 mm Bar Reach - Compact Drop Bend - Material: Aluminum
Profile Design's DRiVe handlebars use the latest in ergonometric design to offer progressively sized handlebars built around a cyclist's most powerful hand positions. A long-radius transition to the hood position distributes pressure evenly across a rider's palm and provides clearance for their arm when they're sprinting in the drops. Short reach and flat transitions perfectly suit modern frame geometries and create a comfortable cruising position on top of the handlebars. The gradual, dual-radius drop eliminates sharp angles and ensures that riders can reach the brake and shift levers while they're in the drops.
DH / Freeride / All Mountain Chromag utilizes the 35mm clamp size to create a wider, stronger bar in the same weight class as its 31.8 counterpart - the Fubars OSX. The OSX 35 is made from 7000 series aluminum. It provides the best strength to weight ratio possible. This is a strong bar best suited to DH/Freeride or trail riding. At 800mm it is our widest aluminum bar. Same perfect fit as the original OSX, with 25mm rise, 5-degree upsweep and 8-degree back sweep.
$49.90 - $53.90
- 6061-T12 aluminum with round, Compact bend and a shallow drop - easy to reach brake lever positioning - Drop: 130mm - Reach: 75mm
Zipp's SL-70 Aero is, in every way, a high-performance bar. This unidirectional carbon handlebar is packed with innovations for best-in-class fit, ergonomics and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp’s most advanced bar refinements while building on the trend-setting aero legacy of the VukaSprint. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The 10-degree ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in the drops. - Unidirectional carbon construction - Airfoil top bar reduces drag by .63 Newtons over traditional round tube - Drops angled out 4 degrees with 10 degree ramp angle - Features Zipp’s Rapid Routing system, also used in the Vuka Aero system, for easy internal cable routing. UCI legal. - Compatible with all mechanical brake/gear systems and all electronic gear systems. - Not clip compatible.
• The NeoClassic features the traditional round drops that many Tour de France and Classics champions prefer, now updated with a shorter reach and shallower drop • Center section is aero bar compatible • Offers more hand positions in the drops than anatomical and ergo bends • The preferred bend style of countless pro riders • 301g (40cm)
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust. The VukaClip is available with an above-bar or below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market. Features - Fit, security, and adjustability - Above-bar or below-bar mounting system - Compatible with most extensions
- Oversized BMX style cruiser bars perfect for wheelie bikes - Durable chromoly construction with TIG-welded crossbar - 22.2mm clamp and grip area - Width: 31.5-inch - Rise/Reach: 7-inch - Upsweep: 1° - Back Sweep: 10° - Material: Chromoly
The short reach, shallow drop, and feathery weight of Ritchey's SuperLogic Carbon Evo Curve Road Bar make it a favorite among cyclists looking to build their dream bike. This Evo model has a 4-degree sweep on the tops for exceptional ergonomic comfort. Monocoque carbon construction gives you strength and stiffness as well as vibration damping for long-ride comfort, all at a weight that is worthy for even the lightest super bikes. Plus, this stellar bar is compatible with clip-on aero bars, and the stem- and brake-clamp regions are textured for a super-secure hold.
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short reach shallow drop geometry and full Di2 compatibility. Who It's For Road riders with a preference for compact geometry, light weight, and refined electronic groupset integration. Why We Made It Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains including compatibility with Shimano RS-EW910 bar end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs.
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter
A purpose-built carbon drop bar specifically designed to improve the off-road drop bar ride experience. Whether it’s descending the steep and technical grades at the Crusher in the Tushar, finding more comfortable hand positions during the 200-mile slog across Kansas at the Dirty Kanza, or adventure riding in your own backyard, this full carbon handlebar provides performance-driven gravel riders with the options, comfort, and control they need to grind gravel with confidence.
Simply put, it’s the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
Your rock-steady set and forget road bar. Only a few grams heavier than the EA70 and sporting the same MCD drop technology as our top of the line road bars. These budget friendly bars will leave you comfortable in the saddle all day without breaking the bank. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 315g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 38cm, 40cm, 42cm, 44cm, 46cm - Reach: 80mm - Drop: 125mm - Materials: EA50 alloy
With the EC70 Aero, you'll stay comfortable while reducing drag. Thanks to the flattened top profile with internal cable routing and MCD shape technology, this handlebar provides more comfort during long days in the saddle while cheating the wind. And with Easton’s proven composite TaperWall technology and Intelligent Flexibility, the EC70 SL is nice and light at just 255 grams (42cm). - Weight of 42cm bar (grams): 255 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat
The carbon WCS EvoCurve bar features a short reach and shallow drop with a 5-degree sweep at the ovalized top section. Its smooth, double-radius drops afford great hand position, and its center section is aero bar compatible. Other features include no-slip grit at stem and brake lever mounting surfaces plus cable grooves for easier installation. - Carbon monocoque - Available in 40/42/44cm widths - Measured center-to-center where the levers mount - 31.8mm stem clamp diamater - Drop/Reach: -- 38cm = 130/75mm -- 40, 42, 44cm = 130/80mm - Matte UD carbon finish - 220g (42cm)
The Carbon Streem features an extremely aggressive wing-shaped top section that saves watts while providing an incredibly comfortable hand position for cruising uphill. The drops feature a traditional bend-the choice of many Ritchey-sponsored pro riders - UCI compliant 43.5x16mm wing-shaped top section cuts through the wind - Gentle sweep to tops and broad platform-great for seated climbing - Internal cable groove-no need to tape all the way to the stem - No-slip grit at stem and brake lever clamp areas - Fully internal routing for Shimano Di2 EW-RS910 Junction box - Carbon monocoque - Compatible w/ Shimano EW-RS910 junction box/end plug + internal routing - Measured center-to-center where the levers mount - 31.8mm center section - Drop/Reach: 38cm = 130/75mm; 40, 42, 44cm = 130/80mm - Available in matte UD carbon finish - 195g (42mm)
Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.
Light weight, comfort, and strength: The SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo improves upon the flat bar top shape of its carbon predecessor, the Contour SL bar, but also with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128 drop. The short 70mm reach allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. The SL-70 Ergo weighs only 205g but is strong and durable enough for the demands of aggressive cyclocross and gravel racing. - Unidirectional Carbon built for stiffness, comfort and light weight - Ergonomic top for all-day comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - 70mm reach - 128mm drop - Variable radius drop - Cable grooves
Page 1 of 4 Next page